D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
proc
/
thread-self
/
root
/
lib
/
modules
/
4.4.0-1128-aws
/
build
/
drivers
/
net
/
ethernet
/
sfc
/
Filename :
Kconfig
back
Copy
config SFC tristate "Solarflare SFC4000/SFC9000/SFC9100-family support" depends on PCI select MDIO select CRC32 select I2C select I2C_ALGOBIT select PTP_1588_CLOCK ---help--- This driver supports 10/40-gigabit Ethernet cards based on the Solarflare SFC4000, SFC9000-family and SFC9100-family controllers. To compile this driver as a module, choose M here. The module will be called sfc. config SFC_MTD bool "Solarflare SFC4000/SFC9000/SFC9100-family MTD support" depends on SFC && MTD && !(SFC=y && MTD=m) default y ---help--- This exposes the on-board flash and/or EEPROM as MTD devices (e.g. /dev/mtd1). This is required to update the firmware or the boot configuration under Linux. config SFC_MCDI_MON bool "Solarflare SFC9000/SFC9100-family hwmon support" depends on SFC && HWMON && !(SFC=y && HWMON=m) default y ---help--- This exposes the on-board firmware-managed sensors as a hardware monitor device. config SFC_SRIOV bool "Solarflare SFC9000-family SR-IOV support" depends on SFC && PCI_IOV default y ---help--- This enables support for the SFC9000 I/O Virtualization features, allowing accelerated network performance in virtualized environments. config SFC_MCDI_LOGGING bool "Solarflare SFC9000/SFC9100-family MCDI logging support" depends on SFC default y ---help--- This enables support for tracing of MCDI (Management-Controller-to- Driver-Interface) commands and responses, allowing debugging of driver/firmware interaction. The tracing is actually enabled by a sysfs file 'mcdi_logging' under the PCI device.