D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
lib
/
modules
/
4.4.0-1128-aws
/
build
/
arch
/
unicore32
/
include
/
mach
/
Filename :
PKUnity.h
back
Copy
/* * linux/arch/unicore32/include/mach/PKUnity.h * * Code specific to PKUnity SoC and UniCore ISA * * Copyright (C) 2001-2010 GUAN Xue-tao * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /* Be sure that virtual mapping is defined right */ #ifndef __MACH_PUV3_HARDWARE_H__ #error You must include hardware.h not PKUnity.h #endif #include <mach/bitfield.h> /* * Memory Definitions */ #define PKUNITY_SDRAM_BASE 0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */ #define PKUNITY_MMIO_BASE 0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */ /* * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB) * 0x80000000 - 0x8000000B 12B PCI Configuration regs * 0x80010000 - 0x80010250 592B PCI Bridge Base * 0x80030000 - 0x8003FFFF 64KB PCI Legacy IO * 0x90000000 - 0x97FFFFFF 128MB PCI AHB-PCI MEM-mapping * 0x98000000 - 0x9FFFFFFF 128MB PCI PCI-AHB MEM-mapping */ #define PKUNITY_PCI_BASE io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */ #include <mach/regs-pci.h> #define PKUNITY_PCICFG_BASE (PKUNITY_PCI_BASE + 0x0) #define PKUNITY_PCIBRI_BASE (PKUNITY_PCI_BASE + 0x00010000) #define PKUNITY_PCILIO_BASE (PKUNITY_PCI_BASE + 0x00030000) #define PKUNITY_PCIMEM_BASE (PKUNITY_PCI_BASE + 0x10000000) #define PKUNITY_PCIAHB_BASE (PKUNITY_PCI_BASE + 0x18000000) /* * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB) */ #define PKUNITY_AHB_BASE io_p2v(0xC0000000) /* AHB-0 is DDR2 SDRAM */ /* AHB-1 is PCI Space */ #define PKUNITY_ARBITER_BASE (PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */ #define PKUNITY_DDR2CTRL_BASE (PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */ #define PKUNITY_DMAC_BASE (PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */ #include <mach/regs-dmac.h> #define PKUNITY_UMAL_BASE (PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */ #include <mach/regs-umal.h> #define PKUNITY_USB_BASE (PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */ #define PKUNITY_SATA_BASE (PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */ #define PKUNITY_SMC_BASE (PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */ /* AHB-9 is for APB bridge */ #define PKUNITY_MME_BASE (PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */ #define PKUNITY_UNIGFX_BASE (PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */ #include <mach/regs-unigfx.h> #define PKUNITY_NAND_BASE (PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */ #include <mach/regs-nand.h> #define PKUNITY_H264D_BASE (PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */ #define PKUNITY_H264E_BASE (PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */ /* * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB) */ #define PKUNITY_APB_BASE io_p2v(0xEE000000) #define PKUNITY_UART0_BASE (PKUNITY_APB_BASE + 0x000000) /* APB-0 */ #define PKUNITY_UART1_BASE (PKUNITY_APB_BASE + 0x100000) /* APB-1 */ #include <mach/regs-uart.h> #define PKUNITY_I2C_BASE (PKUNITY_APB_BASE + 0x200000) /* APB-2 */ #include <mach/regs-i2c.h> #define PKUNITY_SPI_BASE (PKUNITY_APB_BASE + 0x300000) /* APB-3 */ #include <mach/regs-spi.h> #define PKUNITY_AC97_BASE (PKUNITY_APB_BASE + 0x400000) /* APB-4 */ #include <mach/regs-ac97.h> #define PKUNITY_GPIO_BASE (PKUNITY_APB_BASE + 0x500000) /* APB-5 */ #include <mach/regs-gpio.h> #define PKUNITY_INTC_BASE (PKUNITY_APB_BASE + 0x600000) /* APB-6 */ #include <mach/regs-intc.h> #define PKUNITY_RTC_BASE (PKUNITY_APB_BASE + 0x700000) /* APB-7 */ #include <mach/regs-rtc.h> #define PKUNITY_OST_BASE (PKUNITY_APB_BASE + 0x800000) /* APB-8 */ #include <mach/regs-ost.h> #define PKUNITY_RESETC_BASE (PKUNITY_APB_BASE + 0x900000) /* APB-9 */ #include <mach/regs-resetc.h> #define PKUNITY_PM_BASE (PKUNITY_APB_BASE + 0xA00000) /* APB-10 */ #include <mach/regs-pm.h> #define PKUNITY_PS2_BASE (PKUNITY_APB_BASE + 0xB00000) /* APB-11 */ #include <mach/regs-ps2.h> #define PKUNITY_SDC_BASE (PKUNITY_APB_BASE + 0xC00000) /* APB-12 */ #include <mach/regs-sdc.h>