D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
lib
/
modules
/
4.4.0-1128-aws
/
build
/
arch
/
mips
/
include
/
asm
/
mach-lantiq
/
xway
/
Filename :
lantiq_soc.h
back
Copy
/* * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * * Copyright (C) 2010 John Crispin <blogic@openwrt.org> */ #ifndef _LTQ_XWAY_H__ #define _LTQ_XWAY_H__ #ifdef CONFIG_SOC_TYPE_XWAY #include <lantiq.h> /* Chip IDs */ #define SOC_ID_DANUBE1 0x129 #define SOC_ID_DANUBE2 0x12B #define SOC_ID_TWINPASS 0x12D #define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */ #define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */ #define SOC_ID_ARX188 0x16C #define SOC_ID_ARX168_1 0x16D #define SOC_ID_ARX168_2 0x16E #define SOC_ID_ARX182 0x16F #define SOC_ID_GRX188 0x170 #define SOC_ID_GRX168 0x171 #define SOC_ID_VRX288 0x1C0 /* v1.1 */ #define SOC_ID_VRX282 0x1C1 /* v1.1 */ #define SOC_ID_VRX268 0x1C2 /* v1.1 */ #define SOC_ID_GRX268 0x1C8 /* v1.1 */ #define SOC_ID_GRX288 0x1C9 /* v1.1 */ #define SOC_ID_VRX288_2 0x00B /* v1.2 */ #define SOC_ID_VRX268_2 0x00C /* v1.2 */ #define SOC_ID_GRX288_2 0x00D /* v1.2 */ #define SOC_ID_GRX282_2 0x00E /* v1.2 */ #define SOC_ID_VRX220 0x000 #define SOC_ID_ARX362 0x004 #define SOC_ID_ARX368 0x005 #define SOC_ID_ARX382 0x007 #define SOC_ID_ARX388 0x008 #define SOC_ID_URX388 0x009 #define SOC_ID_GRX383 0x010 #define SOC_ID_GRX369 0x011 #define SOC_ID_GRX387 0x00F #define SOC_ID_GRX389 0x012 /* SoC Types */ #define SOC_TYPE_DANUBE 0x01 #define SOC_TYPE_TWINPASS 0x02 #define SOC_TYPE_AR9 0x03 #define SOC_TYPE_VR9 0x04 /* v1.1 */ #define SOC_TYPE_VR9_2 0x05 /* v1.2 */ #define SOC_TYPE_AMAZON_SE 0x06 #define SOC_TYPE_AR10 0x07 #define SOC_TYPE_GRX390 0x08 #define SOC_TYPE_VRX220 0x09 /* BOOT_SEL - find what boot media we have */ #define BS_EXT_ROM 0x0 #define BS_FLASH 0x1 #define BS_MII0 0x2 #define BS_PCI 0x3 #define BS_UART1 0x4 #define BS_SPI 0x5 #define BS_NAND 0x6 #define BS_RMII0 0x7 /* helpers used to access the cgu */ #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) extern __iomem void *ltq_cgu_membase; /* * during early_printk no ioremap is possible * lets use KSEG1 instead */ #define LTQ_ASC1_BASE_ADDR 0x1E100C00 #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR) /* EBU - external bus unit */ #define LTQ_EBU_BUSCON0 0x0060 #define LTQ_EBU_PCC_CON 0x0090 #define LTQ_EBU_PCC_IEN 0x00A4 #define LTQ_EBU_PCC_ISTAT 0x00A0 #define LTQ_EBU_BUSCON1 0x0064 #define LTQ_EBU_ADDRSEL1 0x0024 #define EBU_WRDIS 0x80000000 /* WDT */ #define LTQ_RST_CAUSE_WDTRST 0x20 /* MPS - multi processor unit (voice) */ #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) /* allow booting xrx200 phys */ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); /* request a non-gpio and set the PIO config */ #define PMU_PPE BIT(13) extern void ltq_pmu_enable(unsigned int module); extern void ltq_pmu_disable(unsigned int module); #endif /* CONFIG_SOC_TYPE_XWAY */ #endif /* _LTQ_XWAY_H__ */